Educational tool only. This assessment is not a diagnostic instrument and does not constitute medical advice. Results are for awareness purposes only. Symptom and exposure categories draw on the published work of Ritchie Shoemaker MD and colleagues in the area of Chronic Inflammatory Response Syndrome. Please consult a licensed physician for evaluation and diagnosis.
Step 1 of 3 — Select your environment type
This helps calibrate your results for your specific situation. Choose the environment you are assessing right now.
Step 2 of 3 — Your current health status
This helps apply the correct sensitivity thresholds to your results. People with confirmed or suspected CIRS require stricter environmental thresholds.
Clinical Flag Question
Symptom Relocation Pattern
This single question carries the highest clinical significance in the entire assessment. Answer it carefully and honestly.
When you spend significant time away from this environment — such as travel, vacation, or staying elsewhere — do your symptoms noticeably improve or resolve?Clinical flag
Examples: brain fog clears, energy improves, sleep improves, mood lifts. This pattern is one of the most clinically meaningful signals in the biotoxin illness framework.
Section 1 of 4
Sensory and Observable Indicators
These are the signals most commonly reported in water-damaged building environments.
Do you notice a musty, earthy, or unusual odor in any area of this environment?3 points
Musty odor is produced by microbial volatile organic compounds (MVOCs) — a recognized indicator of active mold growth. Absence of odor does not rule out mold.
Is there any visible discoloration, staining, or suspicious growth on walls, ceilings, grout, window frames, or under sinks?3 points
Visible mold can appear as black, green, gray, white, or pink discoloration. Note that most mold growth in water-damaged buildings is hidden behind surfaces and not visible.
Has this environment experienced any water intrusion, flooding, roof leaks, plumbing leaks, or condensation problems — past or present?3 points
Past water events that were not fully dried within 24 to 48 hours create conditions for sustained mold colonization even if the visible damage has been repaired.
Section 2 of 4
HVAC and Air Handling System
The HVAC system is the most commonly overlooked source of ongoing biotoxin distribution in an otherwise remediated environment.
Are HVAC filters changed regularly and are they rated MERV-11 or higher?2 points
Standard MERV-8 or fiberglass filters do not adequately capture fine mold particles. MERV-11 to MERV-13 is the minimum recommended for sensitive individuals.
Are there visible dust accumulations, discoloration, or musty odor at any HVAC vents or return air grilles?2 points
Discoloration at vents or a musty smell when the system runs can indicate mold colonization within the duct system or on the air handler components.
Has the duct system or air handler been professionally inspected or cleaned in the past three years?2 points
HVAC systems that have not been inspected following any water event or remediation work may continue to distribute contaminants throughout the environment.
Section 3 of 4
Structural and Moisture Conditions
Building characteristics that create or sustain conditions favorable to mold and biotoxin accumulation.
Does the building have a crawlspace — and if so, is it properly encapsulated and free from moisture or visible growth?3 points
Unencapsulated crawlspaces are one of the highest-risk features in residential environments. Mold in a crawlspace distributes freely into living areas through the stack effect.
Are there any soft spots in flooring, bubbling or warping of floor surfaces, or separation of baseboards from walls?2 points
These are physical indicators of moisture intrusion beneath floor surfaces — a common hidden mold source that visual inspection alone cannot identify.
Do symptoms tend to worsen in specific rooms or areas of this environment compared to others?2 points
Room-specific symptom patterns can indicate localized contamination sources and are a useful diagnostic clue for environmental investigators.
Section 4 of 4
Building Age, Drainage, and Moisture Control
Contextual factors that influence overall biotoxin risk in an environment.
Is indoor humidity consistently controlled and maintained below 50%?2 points
Sustained indoor relative humidity above 50% is sufficient to support active mold growth on many building materials. A hygrometer is the only reliable way to confirm this.
Is there adequate drainage away from the foundation — and no evidence of soil grading that directs water toward the structure?1 point
Improper drainage is a primary cause of foundation moisture intrusion and crawlspace flooding — particularly in high-rainfall climates such as Florida.
Was this structure built before 1985?1 point
Older construction predates modern moisture barrier and ventilation standards. Buildings constructed before 1985 have statistically higher rates of historic water intrusion and undisclosed remediation history.
Is this a shared building — such as an apartment, condo, or multi-unit structure — where adjacent units may have unknown water damage history?1 point
Shared wall and ceiling construction means contamination from adjacent units can migrate into your space without any event occurring within your own unit.
Laboratory Results Override Panel
If you have professional environmental testing results, enter them here. Laboratory data supersedes the observational score.
Environmental Relative Moldiness Index. Threshold guidance: below 0 is generally reassuring; 0 to 5 warrants attention; above 5 is elevated. For confirmed CIRS or highly reactive individuals, below negative 1 is the recommended threshold.
Health Effects Roster of Type-Specific Formers of Mycotoxins and Inflammagens. Threshold guidance: 0 to 10 is generally reassuring; 11 to 15 warrants attention; 16 or above is strongly cautionary. Note that a score of 10 or below is the threshold — not below 10.
Environmental Mold and Mycotoxin Assessment by RealTime Laboratories. EMMA identifies specific mycotoxin-producing species and mycotoxin presence directly. Enter your result category if available.
About EMMA testing: The EMMA panel (RealTimeLab.com) tests for the presence of 10 mycotoxin-producing mold species and up to 16 mycotoxins directly from dust samples. It provides information that ERMI and HERTSMI-2 alone cannot capture. For individuals with confirmed or suspected CIRS, EMMA adds significant clinical context.
Laboratory override applied. Your results below reflect your testing data.
Answer all questions to see your results.
Clinical flag active: Your symptom relocation pattern is a significant signal. This warrants evaluation by a CIRS-literate physician regardless of your total score.
0/26
Observational Risk Score
Calculating...
Emil Haldey personally reviews every application. No one impacted by mold should have to navigate it alone.
Important disclaimer: This assessment is for educational awareness purposes only. It is not a diagnostic instrument and has not been independently validated as a clinical screening tool. It does not constitute medical advice and does not replace professional environmental testing or medical evaluation. Symptom and exposure categories draw on the publicly available published work of Ritchie Shoemaker MD and colleagues in the area of Chronic Inflammatory Response Syndrome. ERMI and HERTSMI-2 thresholds referenced are drawn from Shoemaker and Lark 2016 and published Shoemaker Protocol research. All results should be discussed with a licensed physician and a qualified Indoor Environmental Professional. DetoxME provides health strategy, education, and care coordination only. No one impacted by mold should have to navigate it alone.